News
-
Electric heater valve: heat control in the cabin
Each car has a cabin heating system associated with an engine cooling system. Electric heater taps are widely used to control the stove today - read about these devices, their types, design, principle of operation, as well as their sel...Read more -
Rocker arm axle assembly: a reliable basis for the engine valve drive
Many modern engines still use gas distribution schemes with valve drives using rocker arms. Rocker arms are installed on a special part - the axis. Read about what the rocker arm axis is, how it works and works, as well as its selectio...Read more -
Pressure regulator: the pneumatic system of the car is under control
The pneumatic system of cars and tractors operates normally in a certain pressure range, when the pressure changes, its failures and breakdowns are possible. The constancy of the pressure in the system is provided by the regulator - re...Read more -
Tension device: confident operation of chain and belt drives of the engine
Each engine has timing drives and mounted units built on a belt or chain. For normal operation of the drive, the belt and chain must have a certain tension - this is achieved with the help of tensioning devices, the types, design and c...Read more -
MAZ compressor: the “heart” of the truck’s pneumatic system
The basis of the pneumatic system of MAZ trucks is a unit for air injection - a reciprocating compressor. Read about MAZ air compressors, their types, features, design and principle of operation, as well as proper maintenance, selectio...Read more -
Clutch main cylinder: the basis of easy transmission control
For comfortable and tireless transmission control on modern cars, a hydraulic clutch drive is used, one of the main roles in which is played by the master cylinder. Read about the clutch master cylinder, its types, design and operation...Read more -
Connecting rod: reliable arm of the crank mechanism
In the operation of the crank mechanism of piston engines, one of the key roles is played by the parts connecting the pistons and the crankshaft - connecting rods. Read about what a connecting rod is, what types these parts are and how...Read more -
Wheel nut: reliable wheel fasteners
The wheels of almost all wheeled vehicles, tractors and other equipment are mounted on the hub using threaded studs and nuts. Read about what a wheel nut is, what types of nuts are used today, how they are arranged, as well as their se...Read more -
KAMAZ differential cross: confident operation of the truck’s drive axles
In the transmissions of KAMAZ trucks, interaxle and cross-axle differentials are provided, in which the central place is occupied by crosses. Learn about what a cross is, what types it is, how it works and what functions it performs, a...Read more -
Hub bearing: reliable wheel support
In most wheeled vehicles, the wheels are held by a hub that rests on the axle through special bearings. Read all about hub bearings, their existing types, designs, features of operation and applicability, as well as the correct selection and replacement of these parts in...Read more -
MTZ belt: reliable drive of engine units of Minsk tractors
The bulk of the mounted units installed on the engines of MTZ (Belarus) tractors has a classic belt drive based on a V-belt. Read all about MTZ belts, their design features, types, characteristics and applicability, as well as their co...Read more -
Muffler clamp: reliable installation of automotive exhaust systems
Every vehicle with an internal combustion engine shall be equipped with an exhaust system. One of the main mounting products of this system is the silencer clamp - read all about the clamps, their types, design and applicability, as we...Read more
