News
-
Retractor relay: starter operation control
The electric car starter is controlled by a special device located on its body - a retractor (or traction) relay. Read all about retractor relays, their design, types and principle of operation, as well as the correct selection and rep...Read more -
Cab tipping mechanism cylinder: easy lifting and lowering of the cab
In cars with a cabover cab, an important auxiliary system is provided - a rollover mechanism with a hydraulic cylinder as a power element. Read all about the cylinders of the cab tipping mechanism, their existing types and designs, as ...Read more -
Gearbox bearing: anti-friction in the transmission
In any gearbox, as in almost every mechanical device with rotating parts, there are rolling bearings in the amount of up to 12 or more pieces. Read all about gearbox bearings, their types, design and characteristics, as well as the cor...Read more -
Brake lever adjustment: reliable brake actuator
In cars, buses and other equipment with pneumatically operated brakes, the transfer of force from the brake chamber to the pads is carried out by means of a special part - an adjusting lever. Read all about levers, their types, design ...Read more -
Sound signal: sound warns of danger
All modern vehicles are equipped with an audible signal, which is used to prevent traffic accidents. Read about what a sound signal is, what types it is, how it works and what its work is based on, as well as the choice of signals and ...Read more -
Oil-deflecting cap: reliable protection of the combustion chambers from oil
n any modern internal combustion engine, seals are provided to prevent oil from the cylinder head from entering the combustion chambers - oil deflector caps. Learn all about these parts, their types, design and principle of operation, ...Read more -
Condensate drain valve: protection of the pneumatic system from moisture and oil
In the pneumatic system of a car or tractor, a certain amount of moisture (condensate) and oil always accumulates - these impurities are removed from the receivers through the condensate drain valves (valves). Read all about these cran...Read more -
Parking brake cable: the basis of car safety in the parking lot
Every modern car is equipped with several brake systems, including parking, or "handbrake". The brake mechanisms of the handbrake are driven by flexible steel cables - read all about these parts, their existing types and designs, as we...Read more -
Gasket of the valve cover: cleanliness of the engine and protection of the valve mechanism
In engines with overhead valves and other timing devices, a cover is provided, which is installed on the cylinder head through a gasket. Read about what a valve cover gasket is, what types it is and how it works, as well as its correct...Read more -
MTZ axle shaft of the final drive: a strong link in the transmission of the tractor
The transmission of MTZ tractors uses traditional differentials and final gears that transmit torque to the wheels or wheel gearboxes using axle shafts. Read all about MTZ final drive shafts, their types and designs, as well as their s...Read more -
DAEWOO crankshaft oil seal: reliable crankshaft seal
In Korean Daewoo engines, as in any other, there are sealing elements of the crankshaft - front and rear oil seals. Read all about Daewoo oil seals, their types, design, features and applicability, as well as the correct selection and ...Read more -
Idle speed regulator: reliable engine operation in all modes
The basis for controlling the injection engine is the throttle assembly, which regulates the flow of air into the cylinders. At idle, the air supply function goes to another unit - the idle speed regulator. Read about regulators, their...Read more
